The Bracket attaches to the XLR stock with M-Lok nuts and the M-Lok Adjustable Bag Rider bolts to the bracket. This setup provides the same superior functionality as the other ABR™s. The longer dowels will clear. Bracket supplied with all mounting hardware needed to mount to the stock. One hole needs to be added for the bottom attachment bolt. The bracket needs to be mounted using the existing hole in the stock and the lower hole in the bracket will be used as a guide for the supplied bolt - a 3/16 drill or end mill should be used.
Installation:
Requires drilling a single lower attachment hole. Mount the bracket using the existing factory hole, and use the lower hole in the bracket as a guide for the drill or end mill. Recommended spindle speed is 1,500 -2,000 RPM. Tip: To prevent carbon fiber splintering or delamination upon breakthrough, firmly back or clamp a wood block against the backside of the hole.
Made from 6061-T6 alum and Black Anodized Class II
Please note that this product will not fit other Rifle without modification.
Non-Affiliation Disclaimer. We are not affiliated, associated, authorized, endorsed by, or in any way officially connected with the XLR Industries
The Bracket attaches to the XLR stock with M-Lok nuts and the M-Lok Adjustable Bag Rider bolts to the bracket. This setup provides the same superior functionality as the other ABR™s. The longer dowels will clear. Bracket supplied with all mounting hardware needed to mount to the stock. One hole needs to be added for the bottom attachment bolt. The bracket needs to be mounted using the existing hole in the stock and the lower hole in the bracket will be used as a guide for the supplied bolt - a 3/16 drill or end mill should be used.
Installation:
Requires drilling a single lower attachment hole. Mount the bracket using the existing factory hole, and use the lower hole in the bracket as a guide for the drill or end mill. Recommended spindle speed is 1,500 -2,000 RPM. Tip: To prevent carbon fiber splintering or delamination upon breakthrough, firmly back or clamp a wood block against the backside of the hole.
Made from 6061-T6 alum and Black Anodized Class II
Please note that this product will not fit other Rifle without modification.
Non-Affiliation Disclaimer. We are not affiliated, associated, authorized, endorsed by, or in any way officially connected with the XLR Industries
