The Angle Mounted Adjustable Bag Rider (Patented) is designed to bolt directly to the bottom of the MDT stocks (and some Savage) that have an Angled mounting surface. There must be a mounting SLOT in the bottom. Made in the USA!
Two lower rider options are available - the V and ELR. The ELR base is .850” wide. The ‘Bag Selection’ page goes over the lower rider differences. The ABR™ provides rock solid stability, straight tracking and vertical adjustment. The ABRs are CNC machined from USA made 6061 Alum, Anodized Class II Black and weighs 12-14 oz . There are four mounting holes providing the options to cover stock variations - select the two mounting holes farthest from each other. A 5/32 hex wrench will be needed to install the supplied bolts. The ABR™ provides about .95” of travel for the short dowel and 1.48” for the long dowel. Older models stocks ‘without the slot’ will need machining to add the 1/4” bolts through the stock.
If you do not see your rear stock listed below there are Two pics that show the measurements needed to verify if the stock will accept the long dowels. If you are unsure please use the contact button and send picture of the rear stock.
ACC Premier Gen 1 - requires the Angle mounted ABR (see below list)
Premier Gen 2 (there is NO side screw for locking in a lower bar in this stock) Click here
DOES NOT FIT THE NEW ACC ELITE with lower support bar that attaches to the grip (even if you remove the bar). See the "Installs" Page or the “Tall M-Lok” ABR™ for options
Bolt On application and Dowel Length:
ACC - Non-folding -Long Dowels
ACC - Folding stock- Short Dowels
ESS - Non-folding - Long - Dowels
ESS - Folding stock - Short Dowels
SRS - Skeleton Rifle Stock - Short Dowels
LSS-XL - Short Dowels
SRS-XF - Short Dowels. (not the Premier)
Tactical - LSS Gen3 kit
SCS-Lite - Long Dowels (The shorter tube length may require the Folding Stock Adapter to increase LOP- or a longer tube)
SCS - Long Dowels (The shorter tube length may require the Folding Stock Adapter to increase LOP- or a longer tube)
Savage Impulse Elite Precision - Long Dowels
110 RF Elite Precision - Long Dowels
Colt CBX - Long Dowels
Faxon FX7 - Short Dowels
CZ 457 Chassis MTR
HTI Milano - using MDT rear stock
Rival-Arms ST-3X - rear stock (see picture near the bottom)
Modification Required:
Savage B22 & B17 - Long Dowels - Minor modifications are necessary as M-lok nuts and bolts will be required and the counter sinking of the heads on the bottom of the ABR™ will be required for a flush mount. (See Picture)
Foundation Stock - with the Bag Hook - Short Dowels - both mounting and clearance for dowels and stud needed
Caliber Restrictions:
.338 and smaller calibers will use the Standard Dowels
.33XC and larger need the Hardened Dowels
PRS use requires Hardened Dowels
FAQ’s
“Which Option do I choose?”
“Which lower rider (ELR or V) do I choose?”
.338 and smaller calibers will use the Standard Dowels
.33XC and larger needs the Hardened Dowels
PRS requires the Hardened dowels
Which Thumb Wheel thread do I choose?
Fine Thread (standard) - bench rest, ELR
Coarse Thread - PRS and timed events when faster movement is needed
Which Adjustable Grip is suggested?
A Vertical Adjustable Grip provides the maximum spacing behind the grip
Rear weight will need to be modified to clear the bolt heads - a dremel can be used (see pic)
Please note that this product does not fit anything other than the MDT / Savage with a MOUNTING SLOT.
Non-Affiliation Disclaimer. We are not affiliated, associated, authorized, endorsed by, or in any way officially connected with the Modular Driven Technologies or Savage brands .
The Angle Mounted Adjustable Bag Rider (Patented) is designed to bolt directly to the bottom of the MDT stocks (and some Savage) that have an Angled mounting surface. There must be a mounting SLOT in the bottom. Made in the USA!
Two lower rider options are available - the V and ELR. The ELR base is .850” wide. The ‘Bag Selection’ page goes over the lower rider differences. The ABR™ provides rock solid stability, straight tracking and vertical adjustment. The ABRs are CNC machined from USA made 6061 Alum, Anodized Class II Black and weighs 12-14 oz . There are four mounting holes providing the options to cover stock variations - select the two mounting holes farthest from each other. A 5/32 hex wrench will be needed to install the supplied bolts. The ABR™ provides about .95” of travel for the short dowel and 1.48” for the long dowel. Older models stocks ‘without the slot’ will need machining to add the 1/4” bolts through the stock.
If you do not see your rear stock listed below there are Two pics that show the measurements needed to verify if the stock will accept the long dowels. If you are unsure please use the contact button and send picture of the rear stock.
ACC Premier Gen 1 - requires the Angle mounted ABR (see below list)
Premier Gen 2 (there is NO side screw for locking in a lower bar in this stock) Click here
DOES NOT FIT THE NEW ACC ELITE with lower support bar that attaches to the grip (even if you remove the bar). See the "Installs" Page or the “Tall M-Lok” ABR™ for options
Bolt On application and Dowel Length:
ACC - Non-folding -Long Dowels
ACC - Folding stock- Short Dowels
ESS - Non-folding - Long - Dowels
ESS - Folding stock - Short Dowels
SRS - Skeleton Rifle Stock - Short Dowels
LSS-XL - Short Dowels
SRS-XF - Short Dowels. (not the Premier)
Tactical - LSS Gen3 kit
SCS-Lite - Long Dowels (The shorter tube length may require the Folding Stock Adapter to increase LOP- or a longer tube)
SCS - Long Dowels (The shorter tube length may require the Folding Stock Adapter to increase LOP- or a longer tube)
Savage Impulse Elite Precision - Long Dowels
110 RF Elite Precision - Long Dowels
Colt CBX - Long Dowels
Faxon FX7 - Short Dowels
CZ 457 Chassis MTR
HTI Milano - using MDT rear stock
Rival-Arms ST-3X - rear stock (see picture near the bottom)
Modification Required:
Savage B22 & B17 - Long Dowels - Minor modifications are necessary as M-lok nuts and bolts will be required and the counter sinking of the heads on the bottom of the ABR™ will be required for a flush mount. (See Picture)
Foundation Stock - with the Bag Hook - Short Dowels - both mounting and clearance for dowels and stud needed
Caliber Restrictions:
.338 and smaller calibers will use the Standard Dowels
.33XC and larger need the Hardened Dowels
PRS use requires Hardened Dowels
FAQ’s
“Which Option do I choose?”
“Which lower rider (ELR or V) do I choose?”
.338 and smaller calibers will use the Standard Dowels
.33XC and larger needs the Hardened Dowels
PRS requires the Hardened dowels
Which Thumb Wheel thread do I choose?
Fine Thread (standard) - bench rest, ELR
Coarse Thread - PRS and timed events when faster movement is needed
Which Adjustable Grip is suggested?
A Vertical Adjustable Grip provides the maximum spacing behind the grip
Rear weight will need to be modified to clear the bolt heads - a dremel can be used (see pic)
Please note that this product does not fit anything other than the MDT / Savage with a MOUNTING SLOT.
Non-Affiliation Disclaimer. We are not affiliated, associated, authorized, endorsed by, or in any way officially connected with the Modular Driven Technologies or Savage brands .
Image 1 of 14
Image 2 of 14
Image 3 of 14
Image 4 of 14
Image 5 of 14
Image 6 of 14
Image 7 of 14
Image 8 of 14
Image 9 of 14
Image 10 of 14
Image 11 of 14
Image 12 of 14
Image 13 of 14
Image 14 of 14
