Precision Vertical Adjustable Grip with 4 trigger finger spacers - side view. Each trigger finger spacer has two mounting positions - forward for bolt action rifles and back for AR's.
Precision Vertical Adjustable Grip with 4 trigger finger spacers - back view. Each trigger finger spacer has two mounting positions - forward for bolt action rifles and back for AR's.
Precision Vertical Adjustable Grip mounted on a bolt action rifle.
Precision Angled Adjustable Grip with 4 trigger finger spacers - side view. Each trigger finger spacer has two mounting positions - forward for bolt action rifles and back for AR's.
Precision Angle Mounted Adjustable Grip with 4 trigger finger spacers - side view. Designed specifically for the AXSR and AX50 Accuracy International rifle chassis.
AR Vertical Adjustable Grip with 4 trigger finger spacers - side view. Each trigger finger spacer has one mounting position - designed for AR's when the thumb need to be behind the grip.
AR Vertical Adjustable Grip with 4 trigger finger spacers - back view. Each trigger finger spacer has one mounting position - designed for AR's when the thumb need to be behind the grip.
ARAR Angled Adjustable Grip with 4 trigger finger spacers - side view. Each trigger finger spacer has one mounting position - designed for AR's when the thumb need to be behind the grip.
AR Angled Adjustable Grip with 4 trigger finger spacers - back view. Each trigger finger spacer has one mounting position - designed for AR's when the thumb need to be behind the grip.
AR Vertical Adjustable Grip mounted on a bolt action rifle
Precision Angle Mounted Adjustable Grip installed on an AXSR rifle chassis - side view.
Precision Vertical Adjustable AK grip installed on a Brocock Ghost Air rifle
Precision Vertical Adjustable Grip is provided by Accuracy Solutions on their Orca chassis system.
Precision Vertical Adjustable Grip with 4 trigger finger spacers - side view. Each trigger finger spacer has two mounting positions - forward for bolt action rifles and back for AR's.
Precision Vertical Adjustable Grip with 4 trigger finger spacers - back view. Each trigger finger spacer has two mounting positions - forward for bolt action rifles and back for AR's.
Precision Vertical Adjustable Grip mounted on a bolt action rifle.
Precision Angled Adjustable Grip with 4 trigger finger spacers - side view. Each trigger finger spacer has two mounting positions - forward for bolt action rifles and back for AR's.
Precision Angle Mounted Adjustable Grip with 4 trigger finger spacers - side view. Designed specifically for the AXSR and AX50 Accuracy International rifle chassis.
AR Vertical Adjustable Grip with 4 trigger finger spacers - side view. Each trigger finger spacer has one mounting position - designed for AR's when the thumb need to be behind the grip.
AR Vertical Adjustable Grip with 4 trigger finger spacers - back view. Each trigger finger spacer has one mounting position - designed for AR's when the thumb need to be behind the grip.
ARAR Angled Adjustable Grip with 4 trigger finger spacers - side view. Each trigger finger spacer has one mounting position - designed for AR's when the thumb need to be behind the grip.
AR Angled Adjustable Grip with 4 trigger finger spacers - back view. Each trigger finger spacer has one mounting position - designed for AR's when the thumb need to be behind the grip.
AR Vertical Adjustable Grip mounted on a bolt action rifle
Precision Angle Mounted Adjustable Grip installed on an AXSR rifle chassis - side view.
Precision Vertical Adjustable AK grip installed on a Brocock Ghost Air rifle
Precision Vertical Adjustable Grip is provided by Accuracy Solutions on their Orca chassis system.

Adjustable Grips

from $54.98

Functionality:

  • Consistent finger placement - (4 different thickness trigger finger spacers provided)

  • Proper finger mechanics during the trigger pull

  • Faster follow-up shots (with bolt actions)

  • Thumb rest

  • Less interference with hand during recoil

The LSP Adjustable Grip (Patents Pending) allows the shooter to select the proper thickness finger spacer that places the trigger finger properly and consistently on the trigger. Also limiting the trigger finger to only move with the proper mechanics. Simply remove the screw (#1 Phillips head) and the finger spacers can be swapped or moved ‘forward or backward’ as some chassis have the trigger farther from the grip than others. A nylon lock nut is pressed inside the grip (no loctite is needed). The finger spacers are contoured to provide a natural thumb rest. The grip is provided with a hole for the ‘safety ’ spring. 4 different thickness spacers are provided and a 1/4-28 x 7/8” mounting bolt and 1/4" ID star washer. An Extended 3/16” Allen / Hex wrench is needed for tightening the grip thru the hole in the back of the grip (for the Vertical grips). Made in the USA. Approx. 3.5oz. Fits all standard mil-spec AR grips.

The ‘Precision Adjustable Grip’ is supplied on the “Accuracy Solutions ORCA” chassis because there is nothing better.

They are designed to replace “All standard Mils Spec AR grips”.

The “Precision Vertical Adjustable Grip” is designed for Precision shooting - for use when the thumb is always over the trigger finger and additional clearance is needed between the front of the ABR to the back of the grip.

The “Precision Angled Adjustable Grip” is designed with a slight angle and is for use when the thumb is always over the trigger finger spacer. It may not provide enough “open space” behind the grip if an ABR is installed.

The Precision “Angle Mounted”Adjustable Grip is designed for the “Accuracy International -AXSR & AX50” rifles with the ‘Angled’ grip mounting area. After mounted the grip is Vertical like the Precision Vertical grip above. See the attached picture.

AK Precision Vertical Grip - is designed to utilize the Precision Finger spacers which provide 2 mounting locations. For accuracy the thumb should be placed on the trigger finger spacer but the grip was designed to allow the thumb behind the grip.

The ‘AR Vertical Adjustable Grip” is provided with shorter trigger finger spacers which allow the trigger finger to reach the trigger if the thumb is behind the grip (only one mounting position is provided for the AR grip finger spacers).

The ‘AR Angled Adjustable Grip” is provided with shorter trigger finger spacers which allow the trigger finger to reach the trigger if the thumb is behind the grip (only one mounting position is provided for the AR grip finger spacers).

The Adjustable Grips are Long Shot Precision’s second shooting sports industry-changing enhancement and our 8th & 9th patents.

After many months of working with the top-level ELR shooters has led to the best possible grip available. It’s designed to have the least amount of interference with the hand during recoil (when the thumb is on the spacer). Sept 24, 2023, King of 2 Miles Global Finals - 2nd place used the Precision Vertical Adjustable Grip and a Tall Rail Mounted ABR.

Profile:

Functionality:

  • Consistent finger placement - (4 different thickness trigger finger spacers provided)

  • Proper finger mechanics during the trigger pull

  • Faster follow-up shots (with bolt actions)

  • Thumb rest

  • Less interference with hand during recoil

The LSP Adjustable Grip (Patents Pending) allows the shooter to select the proper thickness finger spacer that places the trigger finger properly and consistently on the trigger. Also limiting the trigger finger to only move with the proper mechanics. Simply remove the screw (#1 Phillips head) and the finger spacers can be swapped or moved ‘forward or backward’ as some chassis have the trigger farther from the grip than others. A nylon lock nut is pressed inside the grip (no loctite is needed). The finger spacers are contoured to provide a natural thumb rest. The grip is provided with a hole for the ‘safety ’ spring. 4 different thickness spacers are provided and a 1/4-28 x 7/8” mounting bolt and 1/4" ID star washer. An Extended 3/16” Allen / Hex wrench is needed for tightening the grip thru the hole in the back of the grip (for the Vertical grips). Made in the USA. Approx. 3.5oz. Fits all standard mil-spec AR grips.

The ‘Precision Adjustable Grip’ is supplied on the “Accuracy Solutions ORCA” chassis because there is nothing better.

They are designed to replace “All standard Mils Spec AR grips”.

The “Precision Vertical Adjustable Grip” is designed for Precision shooting - for use when the thumb is always over the trigger finger and additional clearance is needed between the front of the ABR to the back of the grip.

The “Precision Angled Adjustable Grip” is designed with a slight angle and is for use when the thumb is always over the trigger finger spacer. It may not provide enough “open space” behind the grip if an ABR is installed.

The Precision “Angle Mounted”Adjustable Grip is designed for the “Accuracy International -AXSR & AX50” rifles with the ‘Angled’ grip mounting area. After mounted the grip is Vertical like the Precision Vertical grip above. See the attached picture.

AK Precision Vertical Grip - is designed to utilize the Precision Finger spacers which provide 2 mounting locations. For accuracy the thumb should be placed on the trigger finger spacer but the grip was designed to allow the thumb behind the grip.

The ‘AR Vertical Adjustable Grip” is provided with shorter trigger finger spacers which allow the trigger finger to reach the trigger if the thumb is behind the grip (only one mounting position is provided for the AR grip finger spacers).

The ‘AR Angled Adjustable Grip” is provided with shorter trigger finger spacers which allow the trigger finger to reach the trigger if the thumb is behind the grip (only one mounting position is provided for the AR grip finger spacers).

The Adjustable Grips are Long Shot Precision’s second shooting sports industry-changing enhancement and our 8th & 9th patents.

After many months of working with the top-level ELR shooters has led to the best possible grip available. It’s designed to have the least amount of interference with the hand during recoil (when the thumb is on the spacer). Sept 24, 2023, King of 2 Miles Global Finals - 2nd place used the Precision Vertical Adjustable Grip and a Tall Rail Mounted ABR.