**The ABR’s are in stock and will be purchased at the time of installation (see below).**

Non-Affiliation Disclaimer. We are not affiliated, associated, authorized, endorsed by, or in any way officially connected with the Cadex Defense brands .

The Bolt on Adjustable Bag Rider (Patent Pending) is designed to fit the Cadex stock and reduces any additional height being added to the rear by placing the threaded stud up through the lower portion of the frame. It also places the rear dowel in-between the stock and the recoil plate. It will require machining the stock to mill the hole for the stud and milling a slot in the recoil plate to allow full closure of the stock around the rear dowel. No functionality is lost with this installation. The ‘Bolt on’ ABR provides the same superior functionality as the other ABRs while keeping the stud mostly contained in a dirt free environment in some installs.

1.5” Thumb Wheel - Fine Thread option is available with the Hardened dowels for very heavy rifles

Caliber Restrictions:

• .338 and smaller calibers will use the Standard dowels

• .33XC and larger needs the Hardened Dowels

• PRS needs Hardened Dowels

  Use the “Contact Us” at the bottom of the screen if you have any question . “International” Customers contact Solid Solution Designs for installation (click at the top of the page in RED).

USA - Us the Contact button

International - Contact Info@solidsolutiondesigns.com

The ‘Bolt on’ ABR MAY NOT fit all models - send a pic to the contact

The ABR is made and assembled in America from American 6061-T6 alum and Black Anodized Class II

Please note that this product may not fit other chassis’ without modification.